Synthesis and characterisation of p-diethylaminomethylthiacalix[4]arene for selective recovery of platinum from automotive catalyst residue

The ability of chloroform solutions of p-diethylaminomethylthiacalix[4]arene 1 to extract platinum from HCl media was tested. As an ion-pair extractant, compound 1 had the highest platinum extraction ability among all the thiacalix[n]arene derivatives tested in this study. Compound 1 was a highly specific extractant for Pt(IV) ions from single-metal solutions and platinum-group metal solutions from automotive catalyst residue. Various conditions such as contact time, pH, concentration of 1, effect of chloride ions, effect of acidity and Pt(IV) concentration were studied. The distribution ratio of platinum ions (D) was calculated. The platinum complex stoichiometry ratio was obtained using slope analysis. The 1–Pt(IV) complex was characterised using X-ray photoelectron spectroscopy, FT-IR and ¹H NMR. Finally, the Pt(IV) extraction percentage of compound 1 was compared with that of previously reported thiacalix[n]arene-based extractants.     

An efficient procedure for preparation of 2-monoalkyl or 2-monoaryl-3-ethoxycyclobutanones

Optimized reaction conditions for the preparation of various 2-monosubstituted 3-ethoxycyclobutanones are described. 2-Monoalkyl 3-ethoxycyclobutanones were efficiently prepared by the reaction of the corresponding carboxylic acid chlorides and an excess amount of ethyl vinyl ether in the presence of diisopropylethylamine at 90 °C in a sealed tube. 2-Monoaryl 3-ethoxycyclobutanones were prepared by using 2,6-lutidine as a base in the above-mentioned procedure.     

Structure and Kinetics of Desolvation of 2-Hexanone Inclusion Compounds of the Hexapedal Hosts, Hexakis(3-hydroxy-3,3-diphenyl-2-propynyl)benzene and 1,2,3,5,6,7-Hexakis(3-hydroxy-3,3-diphenyl-2-propynyl)naphthalene

The 2-hexanone inclusion compounds of hexakis(3-hydroxy-3,3-diphenyl-2-propynyl)benzene and 1,2,3,5,6,7-hexakis(3-hydroxy-3,3-diphenyl-2-propynyl)naphthalene have been prepared and characterised by single crystal X-ray diffraction and thermal analysis. The kinetic parameters and mechanisms for the desolvation reaction have also been determined for both compounds.     

Synthesis of end‐functionalized poly(phenylacetylene)s with well‐characterized palladium catalysts

End‐functionalized poly(phenylacetylene)s were synthesized by the polymerization of phenylacetylene (PA) using the well‐defined palladium catalysts represented as [(dppf)PdBr(R)] {dppf = 1,1′‐bis(diphenylphosphino)ferrocene}. The Pd catalysts having a series of R groups such as o‐tolyl, mesityl, C(Ph)?CPh₂, C₆H₄‐o‐CH₂OH, C₆H₄‐p‐CN, and C₆H₄‐p‐NO₂ in conjunction with silver triflate polymerized PA to give end‐functionalized poly(PA)s bearing the corresponding R groups in high yields. The results of IR and NMR spectroscopies and MALDI‐TOF mass analyses proved the introduction of these R groups at one end of each polymer chain. The poly(PA) bearing a hydroxy end group was applied as a macroinitiator to the synthesis of a block copolymer composed of poly(PA) and poly(β‐propiolactone) moieties. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Radiation Crosslinking of Chlorinated Poly(Isobutylene-co-Isoprene) with Polyfunctional Monomers

Abstract

It is well known that poly(isobutylene-co-isoprene) (butyl rubber, IIR) is degraded by irradiation. However, we demonstrated that IIR, after chlorination (CIIR) crosslinks by electron beam (EB) irradiation. The gel dose for CIIR was 3.8 kGy. To avoid scission of the main chain, various polyfunctional monomers were added for crosslinking of CIIR at lower doses. It was found that trimethylolpropane trimethacrylate (TMPT) is the most effective accelerator for crosslinking of CIIR at a lower dose. The tensile strength of EB crosslinked by CIIR increases almost linearly with increasing TMPT content.     

Molecular Chirality Recognized by Achiral Compounds

Abstract

Three cases are described where chirality is recognized by achiral molecules, where chirality is induced into achiral compounds through interactions with chiral compounds, and lastly where induced chirality in the solid-state is utilized for an enantio-selective photoreaction. In the first instance, the thermodynamically and kinetically preferred diastereoisomer of an optically labile chromium complex depended on the nature of the achiral solvent. In the second case, for the first time 1,2-chloroethane was trapped and observed in a chiral near-eclipsed form and 1-chloropropane in the truly eclipsed form at room temperature in a 1:1 inclusion complex with an optically active host molecule. Finally, induced chirality in a prochiral compound in the solid-state was successfully employed in an enantio-selective photoreaction. In the two cases, solid-state CD provided valuable information.     

Polymerization of optically active disubstituted acetylene monomers by Pd catalyst bearing bulky phosphine ligand

Chloro- and aryl-substituted acetylene monomers having an optically active group were polymerized by a Pd catalyst [(^tBu₃P)PdMeCl] bearing a bulky phosphine ligand, and by MoCl₅ for comparison. The corresponding disubstituted acetylene polymers with M_n's = 2000–19,500 and 6900–10,800 were obtained in 29–83% and 11–62% yields when the Pd and Mo catalysts were used, respectively. The formation of polyacetylenes, poly[(R)- 1p ], poly[(R)- 1m ], and poly[(S)- 2p ] were confirmed by SEC and the presence of a Raman scattering peak based on the alternating double bonds of the main chain. Pd-based poly[(R)- 1m ] exhibited CD signals around 350 nm assignable to a certain secondary structure, while Mo-based poly[(R)- 1m ] did not. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3011–3016     

Improving Data Quality in Traditional Low-Dose Scanning Transmission Electron Microscopy Imaging

It has become very important to study and find optimal conditions for imaging electron-beam (e-beam) sensitive materials in scanning transmission electron microscopy under low electron-dose with high signal-to-noise ratio (SNR). Convergence and collection angles and electron-probe current are essential parameters. However, these parameters have rarely been discussed in a systematic way. In this paper, the illumination and collection conditions are optimized according to the resolution requirement of different materials by adjusting the condenser and intermediate lenses in a commercial transmission electron microscope. To demonstrate the significance of optimizing these parameters, two examples, zeolite MFI and metal–organic framework (MOF) MIL-101, are taken among the sensitive materials, with the most important electron incidences along the [010] and <110> directions, respectively. High SNR atomic resolution images of MFI are obtained with e-beam current as low as 0.50 pA, reaching information transfer for reflection up to 18 0 2 corresponding to d-spacing of 0.11 nm, close to the resolution limit of 0.098 nm from resolvable diffraction limit. MOF MIL-101 is characterized under an even lower e-beam 0.2 pA to avoid severe beam damage. High-quality annular dark and bright field images are obtained, which proves the wide applicability of this method on more e-beam sensitive materials.     

Pyrolysis of Dibenzyl Selenides to Bibenzyls

The formation of carbon-carbon bond by sulfur extrusion such as pyrolysis of cyclic sulfones is well known as an important synthetic method, especially for the synthesis of cyclophane framework.¹⁾ Little is known about selenium extrusion as the counterpart, though organoseleniums have been properly appreciated as a useful tool for manipulating a functional group.²⁾ Lardon reported that the thermal decomposition of dibenzyl diselenide led to a mixture of dibenzyl selenide and polyselenides.³⁾ In contrast, recent reports showed that at 210°C, heating bis(diphenylmethyl) diselenide resulted in ready selenium extrusion to 1,1,2,2-tetraphenylethane⁴⁾, and dianthrylmethyl mono- and diselenides to 1,2-dianthrylethane.⁵⁾ Therefore,- it is worthwhile to study the thermal behavior of dibenzyl selenide itself.